Fxs Port Polarity Configuration Section; Trunk Group Page (Spa8000); Line Enable Section - Linksys RTP300 - Broadband Router With 2 Phone Ports Administration Manual

Voice tab > Line page >

FXS Port Polarity Configuration section

Field Description
Idle Polarity Polarity before a call is connected: Forward or Reverse.
The default is Forward.
Caller Conn Polarity Polarity after an outbound call is connected: Forward or Reverse.
The default is Forward.
Callee Conn Polarity Polarity after an inbound call is connected: Forward or Reverse.
The default is Forward.
Voice tab >

Trunk Group page (SPA8000)

On the SPA8000, you can use the Trunk Group pages (T1 ... T4) to configure the Trunk Groups.
This page includes the following sections:
• "Line Enable section" section on page 135
• "NAT Settings section" section on page 139
• "Network Settings section" section on page 136
• "SIP Settings section" section on page 136
• "Subscriber Information section" section on page 138
• "Dial Plan section" section on page 139
• "Proxy and Registration section" section on page 145
Voice tab > Trunk Group page >

Line Enable section

Field Description
Line Enable
To enable this line for service, select yes. Otherwise, select no.
The default is yes.
Linksys ATA Administration Guide
Trunk Group page (SPA8000)
135