Using The Spot Auto Focus Mode - Casio QV-4000 User Manual

Using the Spot Auto Focus Mode

With Spot Auto Focus, you can select one of nine focus
frames to suit the object on which you want Auto Focus to be
performed.
1.
Use the selector dial to select "
mode.
2.
Compose the image you want to record.
3.
While holding down FOCUS to display all of the
available focus frame positions, rock the con-
trol button left, right, up, or down to move the
[+] mark to the focus frame location you want
to use.
• The currently selected focus frame is the one where
the [+] mark is located.
OTHER RECORDING FUNCTIONS
4.
IMPORTANT!
" as the focus
E-63
After selecting the focus frame you want, re-
lease FOCUS.
• This makes the focus frame you selected the active
focus frame.
• Note that you cannot change the focus frame position
while a Best Shot Mode composition outline is on the
display.
• The focus frame position you specify with the above
procedure is also used as the area for focus area ex-
pansion (page E-67), and center-weighted and spot
metering (page E-68).
• You can find out the status of the focus operation by
checking the color of the focus frame and the status of
the operation/card access lamp. See "Using Auto Fo-
cus (Multi-area Auto Focus)" on page E-62 for more
information.