Messages - Casio QV-4000 User Manual

Messages

RECORD ERROR Some problem occurred when compressing image
data to save it on the memory card. Shoot the image
again.
There are no images There is no image data stored on the memory card.
on this memory card!
This camera cannot The image file you are trying to view is corrupted, or
display the image it was recorded with a camera whose image file for-
you selected! mat is not supported by this camera.
REPLACE BATTERY! Battery power is low. Camera power turns off auto-
matically shortly after this message appears.
NOT FORMAT The memory card you are using is not formatted.
MENU You must format the memory card before you can
use it to store images (page E-39).
REFERENCE
CF ERROR
To use this card, you
must turn the camera
off and then back on
again. If this
message appears
again, you need to
format this
CompactFlash card.
FORMAT MENU
E-158
There is some problem with the memory card you
are using. Perform the following procedure to cor-
rect the problem.
Warning!
The following procedure deletes all files currently
stored on the memory card. Before proceeding,
try to back up the contents of the memory card
onto your computer's hard disk drive or some
other type of external storage medium.
1. Press MENU.
2. Rock the control button up or down to select
"Yes" and then click the control button.
• To cancel this procedure, press MENU.
• Whenever formatting a memory card, be sure to
use the AC adaptor to power the camera or re-
place its batteries with a full set of new alkaline or
lithium batteries before starting. Unexpected loss
of power can result in incomplete formatting and
improper operation of the memory card.
• The message "There are no images on this
memory card!" appears on the monitor screen af-
ter formatting is complete.