Connecting To A Computer - Casio QV-4000 User Manual

Connecting to a Computer

You can use the special USB cable that comes bundled with
the camera to connect it to the USB port of a Windows or
Macintosh computer. Then you can use the Photo Loader
software on the bundled CD-ROM for quick and easy trans-
fer of images from the camera to your computer. First install
the USB driver software from the bundled CD-ROM on your
computer, and then use its special USB cable to connect.
Once connected, your computer recognizes the camera as
an external storage device.
• See the documentation on "Bundled Software User's
Manual" for full details about connections, installing the
USB driver, minimum computer system requirements, and
other information.
CONNECTING TO EXTERNAL EQUIPMENT
• When connecting USB cable to the camera, orient the
• Plug the USB connectors into the ports as far as they will
• The camera is not supplied power by the USB cable.
• Low battery power can cause the camera to turn off sud-
E-138
Connecting to a Computer with the USB Cable
Special USB
cable (bundled
with camera)
USB port
Large connector
(standard USB
connector)
cable's connector in accordance with the shape of the
camera's USB port.
go. Incorrect connection can result in improper operation.
denly during data communication with a computer. Be-
cause of this, you should use the optionally available AC
adaptor to power the camera whenever performing data
communication.
Small connector
(MINI-B)
USB port