Connecting To External Equipment; Connecting To A Television - Casio QV-4000 User Manual

CONNECTING TO EXTERNAL EQUIPMENT

Your camera has three terminals for connection to external
equipment: a VIDEO OUT terminal, a DIGITAL terminal (re-
mote shutter release terminal), and a USB port. You can use
these terminals to connect the camera to a television, VCR,
computer, or other external equipment. See page E-103 for
information about the DIGITAL port (remote shutter release
terminal).
IMPORTANT!
• Be sure to turn off both the camera and the other
equipment before making any connections.
• Check the documentation that comes with your other
equipment for information you may need to know
when making connections.
• Leaving the same image displayed on a television or
computer display screen for very long periods can
cause the image to be "burned in" on the screen.
When this happens, a faint after-image remains on the
screen, even after you disconnect the camera. To
avoid this, you should not leave the same image dis-
played on such a screen for very long periods.
• This camera does not support cable transfer of data
with other CASIO digital cameras, portable tele-
phones, etc.
CONNECTING TO EXTERNAL EQUIPMENT
Images being displayed on the camera's monitor screen,
whether for recording or playback, can also be displayed on
the screen of a connected television. Connect the camera to
a TV as illustrated below.
E-136

Connecting to a Television

Special video cable
(bundled with
camera.)
TV
INPUT
L R
VIDEO
AUDIO
VIDEO IN
terminal
VIDEO OUT
terminal