Chapter 3. Connecting To The Internet: Wan Setup; Internet Setup Wizard; Figure 11: Internet Connection Setup Wizard - D-Link DSR-250 User Manual

Unified Services Router
Chapter 3. Connecting to the Internet:
This router has two WAN ports that can be used to establish a connection to the
internet. The following ISP connection types are supported: DHCP, Static, PPPoE,
PPTP, L2TP, 3G Internet (via USB modem).
It is assumed that you have arranged for internet service with your Internet Service
Provider (ISP). Please contact your ISP or network administrator for the configuration
information that will be required to setup the router.

3.1 Internet Setup Wizard

Setup > Wizard > Internet
The Internet Connection Setup Wizard is available for users new to networking. By
going through a few straightforward configuration pages you can take the information
provided by your ISP to get your WAN connection up and enable internet access for
your network.

Figure 11: Internet Connection Setup Wizard

You can start using the Wizard by logging in with the administrator password for the
router. Once authenticated set the time zone that you are located in, and then choose
the type of ISP connection type: DHCP, Static, PPPoE, PPTP, L2TP. Depending on
the connection type a username/password may be required to register this router with
the ISP. In most cases the default settings can be used if the ISP did not specify that
parameter. The last step in the Wizard is to click the Connect button, which confirms
the settings by establishing a link with the ISP. Once connected, you can move on and
configure other features in this router.
WAN Setup
28
User Manual