Figure 3: Configuring The Router Advertisement Daemon - D-Link DSR-250 User Manual

Unified Services Router
seconds. Upon expiration of this value, a new RADVD exchange must take
place between the host and this router.
Figure 3: Configuring the Router Adverti sement Daemon
Advertisement Prefixes
Advanced > IPv6 > IPv6 LAN > Advertisement Prefixes
The router advertisements configured with advertisement prefixes allow this router
to inform hosts how to perform stateless address auto configuration. Router
advertisements contain a list of subnet prefixes that allow the router to determine
neighbors and whether the host is on the same link as the router .
The following prefix options are available for the router advertisements:

IPv6 Prefix Type: To ensure hosts support IPv6 to IPv4 tunnel select the
6to4 prefix type. Selecting Global/Local/ISATAP will allow the nodes to
support all other IPv6 routing options

SLA ID: The SLA ID (Site-Level Aggregation Identifier) is available when
6to4 Prefixes are selected. This should be the interface ID of the router's
LAN interface used for router advertisements.
20
User Manual