Notification Response; Chapter 12 Summary Of Cisco Crs-1 Series Xml Api Configuration Tags - Cisco CRS-1 - Carrier Routing System Router Api Manual

Summary of Cisco CRS-1 Series XML API
Configuration Tags
Table 12-1
application programming interface (API) tag mapping for the Cisco CRS-1 Series Carrier Routing
System (Cisco CRS-1 Series) router target configuration.
The XML API code is available for use on any Cisco platform that runs Cisco IOS XR software.
Note
Table 12-1 CLI Command or Operation to XML Tag Mapping
CLI Command or Operation
To end, abort, or exit
config mode)
clear
show config
show config running
show config merge
show config failed
configure exclusive
To change the selected config
To delete the selected config
commit
commit atomic
show config failed
show commit changes commitid
show commit changes since commitid <Get> with <Configuration Source="CommitChanges"
rollback configuration to commitid <Rollback> with <CommitID>
rollback configuration last number <Rollback> with <Previous>
show rollback changes to commitid
OL-4596-01
provides the command-line interface (CLI) to extensible markup language (XML)
1
(from top
3
C H A P T E R
XML Tag
2
<Unlock>
<Clear>
<Get> with <Configuration Source="ChangedConfig">
<Get> with <Configuration Source="CurrentConfig">
<Get> with <Configuration Source="MergedConfig">
<Load> with <FailedConfig> followed by <Get> with
<Configuration Source="ChangedConfig">
4
<Lock>
<Set> with <Configuration>
<Delete> with <Configuration>
<Commit Mode="BestEffort">
<Commit Mode="Atomic">
<Load> with <FailedConfig>
<Get> with <Configuration Source="CommitChanges"
"ForCommitID= "commitid">
SinceCommitID= "commitid">
<Get> with <Configuration Source="RollbackChanges"
ToCommitID="commitid">
Cisco CRS-1 Series Carrier Routing System XML API Guide
12
12-113