Cisco CRS-1 - Carrier Routing System Router Api Manual page 121

Multiprotocol Label Switching traffic engineering.
MPLS-TE
See Modular Services Card.
MSC
N
A card installed and running in an Cisco CRS-1 Series routing system. In the Cisco 12000 series
Node
Internet Router, nodes are identified by slot number (for example, node 1).
R
Network layer device that uses one or more routing metrics to determine the optimal path along which
Router
network traffic should be forwarded. Routers forward packets from one network to another based on
network layer information.
The router configuration currently in effect. Although, the user can save multiple versions of the router
Running
Configuration configuration for future reference, there is only one copy of the running configuration in the router at
any given time. An explicit commit operation must be performed to make changes to or update the
running configuration on the Cisco CRS-1 Series router.
S
A list of packages activated for a particular node. A software configuration consists of a boot package
Software
Configuration and additional feature packages.
Secure Shell
SSH
Secure Socket Layer
SSL
The router configuration designated to be applied on next router startup.
Startup
Configuration
A switch between the active and standby cards; the old active card may be dead prior to switchover
Switchover
(death of the active card is one of the causes for the switchover). Also known as failover.
Reload of an Cisco CRS-1 Series router node.
System Reload
Soft reset of an Cisco CRS-1 Series router node. This involves restarting all the processes running on
System Restart
that node.
T
Technical Assistance Center.
TAC
OL-4596-01
Cisco CRS-1 Series Carrier Routing System XML API Guide
Glossary
123