Setting The Configuration Register While Running Cisco Ios - Cisco CISCO7204VXR Installation And Configuration Manual

Setting the Configuration Register While Running Cisco IOS

Setting the Configuration Register While Running Cisco IOS
Cisco 7200 VXR Installation and Configuration Guide
10 IP broadcasts with ones
09 Do not use secondary bootstrap
08 Break disabled
07 OEM disabled
06 Ignore configuration disabled
05 Fast boot disabled
04 Fan boot disabled
03-00 Boot to ROM monitor
rommon1 >
Configuration Summary
enabled are:
load rom after netboot fails
console baud: 9600
boot: the ROM Monitor
Do you wish to change the configuration? y/n
Router#
Enter configuration commands, one per line. End with CNTRL/Z.
Router (config)#config-register 0x2142
(config)#end
0x2102
confreg
enable "diagnostic mode"? y/n
enable "use net in IP bcast address"? y/n
disable "use rom after netboot fails"? y/n
enable "use all zero broadcast"? y/n
Appendix A
[n]
[n]: n
[n]: n
[n]: n
[n]: n
Configuration Register Information
OL-5013-08