Casio CLASSPAD MANAGER User Manual page 70

4.
If you want to establish a connection with multiple ClassPad units, repeat step 3 for each
ClassPad unit.
• Each time you establish a connection between a new ClassPad and ClassPad Manager, that
icon of that ClassPad will be added to the ClassPad area of the Exchange Window.
Note
Closing the Exchange Window will automatically disconnect the ClassPad units from ClassPad
Manager.
Precautions when Connecting Multiple ClassPad Units to a Computer
• When establishing connections between multiple ClassPad units and ClassPad Manager, you
need either a computer with multiple USB ports or a USB hub with enough ports to support
connection of the required number of ClassPad units.
• If you plan to use a hub, refer to the manufacturer's instructions for installation and use.
Performance may vary depending on the type of USB hub you use.
■ Troubleshooting a Connection
If step 3 above fails, try performing the following steps on the ClassPad unit.
1.
On the application menu, tap B.
• This starts the Communication application.
2.
Tap [Setup] - [Open Setup Menu].
• This displays the Communication dialog box.
3.
Confi gure the above dialog box with the following settings.
• Cable Type : USB cable
• Wakeup Enable : On
20060301
E-68