Casio CLASSPAD MANAGER User Manual page 51

Status Bar Information
The following shows the information that appears in the Picture application status bar.
Creating and Saving a File
Important!
Performing an operation to create a new fi le or open an existing fi ll will display the Clear All dialog
box shown below.
Clicking [OK] will clear everything in the drawing area. If you want to save the edits you have made
up to this point before opening a new fi le, click [Cancel] and save the data to a fi le.
Note that the Clear All dialog box always appears when you create a new fi le or open an existing
fi le, regardless of whether there are unsaved edits in the drawing area.
■ To create a new fi le
1.
Click [File] - [New].
• On the Clear All dialog box that appears, click [OK]. This displays an image size setting dialog
box.
2.
Input values for the width and height (from 1 to 1000) and then click [OK].
• This creates a new fi le.
File name
<untitled> indicates that the fi le
has not been saved yet.
Size of the image of the fi le
being edited.
20060301
E-49