Download Print this page

Maintenance And Storage; Service Recommendations; Environmental Information - Flymo EHT420 Important Information Manual

Hide thumbs Also See for EHT420:

Advertisement

ALL PRODUCTS
1. Keep all nuts, bolts and screws tight to be sure the
product is in safe working condition.
2. Replace worn or damaged parts for safety.
3. Only use the replacement spare parts and
accessories specified for your product.
4. Store in a cool dry place.
5. Renew your metal blade after 50 hours mowing or 2
years whichever is the sooner - regardless of
condition. (if applicable)
ELECTRIC LAWNMOWERS (including products with
plastic cutters)
1. Be careful during adjustment of the product to
prevent entrapment of the fingers between moving
cutting parts and fixed parts of the machine.
2. Check the grassbox/grassbag frequently for wear or
deterioration. (if applicable)
PETROL PRODUCTS
1. Never store the product with fuel in the tank inside a
building where fumes can reach an open flame or spark.
2. Allow the engine to cool before storing in any enclosure.
3. To reduce fire hazard, keep the engine, muffler and
Your product is uniquely identified by a silver and black product rating label.
We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.
If any part is found defective due to faulty manufacture
within the guarantee period, Electrolux Outdoor
Products, through its Authorised Service Repairers will
effect the repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and
tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any other person
not authorised by Electrolux Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
Where the machine is used commercially the
guarantee is 90 days. (Petrol products only)
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore
it is important that you read the instructions contained in
the Operator's Manual and understand how to operate
and maintain your machine:
Electrolux Outdoor Products are manufactured under an
Environmental Management System (ISO 14001) using,
where practical, components manufactured in the most
environmentally responsible manner, according to
company procedures, and with the potential for
recycling at the end of the products' life.
Packaging is recyclable and plastic components
have been labelled (where practical) for categorised
recycling.
Awareness of the environment must be considered
when disposing of 'end-of-life' product.
If necessary, contact your local authority for disposal
information.
BATTERY DISPOSAL (if applicable)
The battery should be taken to an Authorised
Service Centre or your local Recycling Station.
Do NOT dispose of used battery with household waste.
Do NOT dispose of battery to water.
ENGLISH - 5

MAINTENANCE AND STORAGE

SERVICE RECOMMENDATIONS

GUARANTEE AND GUARANTEE POLICY

ENVIRONMENTAL INFORMATION

fuel storage area free of grass, leaves or excessive
grease.
4. If the fuel tank has to be drained, this should be done
outdoors.
5. Be careful during adjustment of the product to
prevent entrapment of the fingers between moving
cutting parts and fixed parts of the machine.
TRIMMERS
1. To avoid the risk of injury keep fingers and hands
clear of the line cutter on the leading edge of the
guard.
2. Inspect and maintain the trimmer regularly. Any
repairs must be carried out by an authorised repairer.
HEDGETRIMMERS
1. Be careful during adjustment of the Hedgetrimmer to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
2. After use the Hedgetrimmer should be stored using
the cover/storage holder provided.
GARDENVACS
1. Inspect the collection bag regularly. If the collection
bag becomes worn or damaged, replace.
Failures not covered by guarantee
*
Replacing worn or damaged blades, plastic cutters,
nylon line, cutting lines and cutting heads (Check
which parts apply to your product).
*
Failures as a result of not reporting an initial fault.
*
Failures as a result of sudden impact.
*
Failures as a result of not using the product in
accordance with the instructions and
recommendations contained in the operator's manual.
*
Machines used for hire are not covered by this
guarantee.
*
The following items listed are considered as wearing
parts and their life is dependent on regular maintenance
and are, therefore not normally subject to a valid
warranty claim: Blades, Plastic Cutters, Nylon Line,
Spool and line, Cutting Lines, Cutting head, Electric
Mains cable, Debris bag, belts, cables, recoil ropes,
filters. (Check which parts apply to your product).
Caution!
*
Electrolux Outdoor Products does not accept liability
under the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement parts
or additional parts that are not either manufactured or
approved by Electrolux Outdoor Products, or by the
machine having been modified in any way.
Lead/Acid batteries can be harmful and should be
disposed of through the recognised recycling facility
in accordance with European Regulations.
Do NOT incinerate.
DISPOSAL OF FUELS AND LUBRICATING OILS (if
applicable)
Wear protective clothing when handling any fuels
and lubricants.
Avoid contact with skin.
Remove petrol and engine oil before transporting the
product.
Contact your local authority for information of your
nearest Recycling/Disposal Station.
Do NOT dispose of used fuels/oils with household waste.
Do NOT dispose of used fuels/oils to water.
Waste fuels/oils are harmful, but can be recycled and
should be disposed of through the recognised facilities.
Do NOT incinerate.

Advertisement

loading

This manual is also suitable for:

Roller compact 40Xl500