Calling Participants In To A Conference; Calling In To A Conference - Cisco C8510MSR-SKIT-DC - Catalyst 8510 Multiservice Switch Router Getting Started

Calling participants in to a conference

To call participants in to a conference:
1 In the web interface of the MCU MSE 8510 , go to
name of an active conference.
2 On the
Participants
endpoint.
3 In the
Address
where there is no H.323 gatekeeper or SIP registrar, type the IP address,

host name, or SIP URI of an accessible endpoint on your network
if you are using an H.323 gatekeeper, enter the number registered with the

gatekeeper for the required endpoint
if you are using a SIP registrar, enter the number registered with the SIP

registrar for the required endpoint
4 Leave the other fields as their default values and click
MSE 8510 automatically connects to the endpoint.
5 If the endpoint is not configured to automatically answer calls, accept the call on
the endpoint.

Calling in to a conference

Participants can call in to conferences in either one of two ways:
if you have given the conference a numeric identifier and you are using an H.323

gatekeeper or SIP registrar, tell participants to dial the numeric identifier from
their endpoint to join that conference
participants can dial the IP address of the MCU MSE 8510 to access the auto

attendant of the MCU MSE 8510. Participants will see a menu of available
conferences on their video screen and will hear instructions
tab, click
Add participant
field:
Using the MCU MSE 8510
and click on the
Conferences
to call out to an H.323 or SIP
Call endpoint
. The MCU
12