Cisco 2509 - Router - EN User Manual page 174

Common User Group Settings
To set user usage quotas for a user group, follow these steps:
In the navigation bar, click Group Setup.
Step 1
Result: The Group Setup Select page opens.
From the Group list, select a group, and then click Edit Settings.
Step 2
Result: The Group Settings page displays the name of the group at its top.
To define usage quotas based on duration of sessions, follow these steps:
Step 3
a.
b.
c.
To define user session quotas based on number of sessions, follow these steps:
Step 4
a.
b.
User Guide for Cisco Secure ACS for Windows Server
6-14
In the Usage Quotas table, select the Limit each user of this group to x
hours of online time per time unit check box.
Type the number of hours to which you want to limit group members in the
to x hours box.
Use decimal values to indicate minutes. For example, a value of 10.5 would
equal ten hours and 30 minutes.
Up to 5 characters are allowed in the to x hours box.
Note
Select the period for which the quota is effective from the following:
• per Day—From 12:01 a.m. until midnight.
• per Week—From 12:01 a.m. Sunday until midnight Saturday.
per Month—From 12:01 a.m. on the first of the month until midnight on
•
the last day of the month.
Total—An ongoing count of hours, with no end.
•
In the Usage Quotas table, select the Limit each user of this group to x
sessions check box.
Type the number of sessions to which you want to limit users in the to x
sessions box.
Up to 5 characters are allowed in the to x sessions box.
Note
Chapter 6 Setting Up and Managing User Groups
78-14696-01, Version 3.1