Chapter 6 Configuring A Vpn Using Easy Vpn And An Ipsec Tunnel - Cisco 520-T1 - Small Business Pro SR Secure Router Software Configuration Manual

Configuring a VPN Using Easy VPN and an IPsec
Tunnel
The Cisco Secure Router 520 Series routers support the creation of Virtual Private Networks (VPNs).
Cisco routers and other broadband devices provide high-performance connections to the Internet, but
many applications also require the security of VPN connections which perform a high level of
authentication and which encrypt the data between two particular endpoints.
Two types of VPNs are supported—site-to-site and remote access. Site-to-site VPNs are used to connect
branch offices to corporate offices, for example. Remote access VPNs are used by remote clients to log
in to a corporate network.
The example in this chapter illustrates the configuration of a remote access VPN that uses the Cisco Easy
VPN and an IPsec tunnel to configure and secure the connection between the remote client and the
corporate network.
Figure 6-1
1
1 Remote, networked users
2 VPN client—Cisco Secure Router 520 Series router
3
Router—Providing the corporate office network access
OL-14210-01
Figure 6-1 shows a typical deployment scenario.
Remote Access VPN Using IPsec Tunnel
2
Internet
C H A P T E R
3
6
Cisco Secure Router 520 Series Software Configuration Guide
6
5
4
6-1