Configuration Example; Verify Your Dhcp Configuration - Cisco 520-T1 - Small Business Pro SR Secure Router Software Configuration Manual

Configure DHCP

Configuration Example

The following configuration example shows a portion of the configuration file for the DCHP
configuration described in this chapter.
ip dhcp excluded-address 192.168.9.0
!
ip dhcp pool dpool1
import all
network 10.10.0.0 255.255.255.0
default-router 10.10.10.10
dns-server 192.168.35.2
domain-name cisco.com
!
ip domain name smallbiz.com
ip name-server 192.168.11.12

Verify Your DHCP Configuration

Use the following commands to view your DHCP configuration.
•
•
•
Router# show ip dhcp import
Address Pool Name: dpool1
Router# show ip dhcp pool
Pool dpool1 :
Utilization mark (high/low)
Subnet size (first/next)
Total addresses
Leased addresses
Pending event
1 subnet is currently in the pool :
Current index
10.10.0.1
Router# show ip dhcp server statistics
Memory usage
Address pools
Database agents
Automatic bindings
Manual bindings
Expired bindings
Malformed messages
Secure arp entries
Message
BOOTREQUEST
DHCPDISCOVER
DHCPREQUEST
DHCPDECLINE
DHCPRELEASE
DHCPINFORM
Cisco Secure Router 520 Series Software Configuration Guide
5-4
show ip dhcp import—Displays the optional parameters imported into the DHCP server database.
show ip dhcp pool—Displays information about the DHCP address pools.
show ip dhcp server statistics—Displays the DHCP server statistics, such as the number of address
pools, bindings, and so forth.
IP address range
10.10.0.1
15419
1
0
0
0
0
0
0
Received
0
0
0
0
0
0
Chapter 5
: 100 / 0
: 0 / 0
: 254
: 0
: none
- 10.10.0.254
Configuring a LAN with DHCP and VLANs
Leased addresses
0
OL-14210-01