Installing The Router In A Rack - Cisco 2612 Hardware Installation Manual

Setting Up the Chassis
Figure 3-14 Bracket Installation—Center Mounting with Front Panel Forward
Left bracket
for 23-inch rack
Figure 3-15 Bracket Installation—Center Mounting with Rear Panel Forward
Right bracket
for 23-inch rack

Installing the Router in a Rack

After the brackets are secured to the chassis, you can mount the chassis in a rack. Use the illustrations
in the previous section as a guide to attaching the brackets to the rack.
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
•
•
•
Cisco 2600 Series Routers Hardware Installation Guide
3-10
Left (narrow) bracket
for 19-inch rack
NM -HD
V
BA NK 4
BA NK 3
BA NK 2
BA NK 1
Right (wide) bracket
for 19-inch rack
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
Statement 1006
the rack.
SE RI ES
SE RI ES
Use two screws on each side.
BA NK 0
V0 SEE MANU
AL BEFO DSU
RE INSTA
EN LLATI ON 56K
SEE MANU
AL BEFO DSU
RE INSTA
LLATI ON 56K
SEE MANU
AL BEFO
Use two screws on each side.
Chapter 3
Right (wide) bracket
for 19-inch rack
RE INSTA
LLATI ON
Left (narrow) bracket
for 19-inch rack
Installing the Router
Right bracket
for 23-inch rack
Left bracket
for 23-inch rack
OL-2171-06