Advertisement
3. Power-over-Ethernet Installation for TV-IP512P/TV-IP512WN
1. Select 12V for the voltage.
2. Connect an Ethernet cable from a PoE switch
to the DATA-IN port on the TPE-102S.
3. Connect the built-in Ethernet cable on the TPE-
102S to the TV-IP512P/TV-IP512WN's LAN
port.
4. Insert the male power plug to the IP camera.
5. Connect the provided 2.0mm jumper cable to
the female power connector and to the TPE-
102S.
4
Advertisement
