Advertisement
2. Hardware Installation and Configuration
Note:
1. It is recommended that you configure the IP Camera from a wired computer.
2. If you would like to use IPViewPro 2.0 software, please install the software by
clicking the Install IPView Pro 2.0 in the Autorun window and refer to the User's
Guide on the CD for more information
1. Insert the Utility CD-ROM into your CD-ROM
drive.
2. Click Run autorun.exe (Windows 7/Vista only).
3. Click Setup Wizard.
4. Click Next. Then follow the Setup Wizard
instructions.
2
Advertisement
