Remote Control; Features Of The Control Panel; Lcd Display - Danby Premiere DPAC 13009 Owner's Use And Care Manual

OPERATION- Features of the Control Panel

REMOTE CONTROL

The remote operates within a range of 8 meters (26ft.) from the receiver located inside the main
unit. Any obstruction between the receiver and remote may cause signal interference, limiting the
ability to program the main unit.
This Class B digital apparatus complies with Canadian ICES-003

LCD DISPLAY

Running Indicator
FAN SPEED Indicator
EMERGENCY
ON / OFF SWITCH
a) This switch is used when unit needs
temporary turning on/off.
b) When pressed, unit starts
running. The running mode and fan
speed mode are set at auto.
c) Press emergency button again until
unit stops running.
Key Pad Functions:
Power Switch: Turn unit ON/OFF
FAN: Select from four (4) fan settings: Auto, High,
Medium, and Low.
MODE: Allows you to scroll through and select the
desired operating mode.
CLOCK
AUTO-TIMER
Fahrenheit/Celsius Selector: Press °F/°C selector to
switch to °F/°C setting. Initial setting is °C.
UP
DOWN
Launch Indicator
Clock Indicator
TIMER setting Indicator
TIMER ON/OFF
°F/°C Indicator
SETTING TEMPERATURE
Indicator
Blue Indicator
Red/Green Indicator
Blue Indicator
7
Automatic
Cooling Mode
Dehumidify Mode
Fan Only Mode
HIGH Fan Speed
MEDIUM Fan Speed
LOW Fan Speed
Red/Green Indicator
Blue Indicator
Emergency Switch
Red/Green Indicator
Blue Indicator
Red/Green Indicator
Blue Indicator