Device Setting; Toolbar - TRENDnet TPE-S88 User Manual

Add Item: To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.
Delete Item: To delete the device in the Monitor List.

Device Setting

You can set the device by using the function key in the Device Setting
Dialog box.
Configuration Setting: In this Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name and Location.
Select the device in the Discovery list or Monitor List and press this
button, then the Configuration Setting window will pop out as Figure
9, after filling up the data that you want to change, you must fill up the
password and press the "Set" to process the data changed immediately.
Figure 9. Configuration Setting
Password Change: You can use this Password Change when you
need to change the password, fill in the password needed in the dialog
box and press "Set" button to precede the password change
immediately.
19
Figure 10. Password Change
Firmware Upgrade: When the device has a new function, there will
be a new firmware to update the device, use this function to update.
Web Access: Double click the device in the Monitor List or select a
device in the Monitor List and press this "Web Access" button to
access the device in Web browser.

Toolbar

The toolbar in the Web Management Utility have four main tabs, File,
View, Options and Help.
In the "File TAB", there are Monitor Save, Monitor Save As, Monitor
Load and Exit.
Figure 11.
20