Switchport Priority Default; Show Vlan Traffic-Classes - TRENDnet TL2-E284 User Manual

24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots
Command
Syntax Description
Default Settings
Command Modes
Example
Command History

switchport priority default

Command
Syntax Description
Default Settings
Command Modes
User Guidelines
Example
Command History

show vlan traffic-classes

Command
40-3
cosq scheduling algorithm { strict | wrr }
strict
The traffic in highest queue always process first.
wrr
Using weighted round-robin algorithm to handle packets in
priority queues.
Strict
Global Configuration Mode
switch(config)# cosq scheduling algorithm wrr
Version History
1.00.001 This command was introduced
To setup the 802.1p priority for untagged packets.
switchport priority default <priority value(0-7)>
no switchport priority default
priority value(0-7)
0
Interface Configuration Mode
The no form resets the priority to default value.
switch(config-if)#
Version History
1.00.001 This command was introduced
To display the current setting of 802.1p priority and traffic class mapping.
show vlan traffic-classes
Specify which priority to set.