Installation - TRENDnet TEW-711BR User Manual

TEW-711BR
TRENDnet User's Guide

Installation

1. Verify that you have an Internet connection when connecting your
computer directly to the xDSL/Cable modem.
2. Turn off your xDSL/Cable modem.
3. Disconnect the Ethernet cable (also called network cable) from your
xDSL/Cable modem and your computer.
4. Connect one end of a network cable to one of your router LAN ports
(1-4). Connect the other end of the network cable to the computer
Ethernet port (also called network port).
5. Connect one end of a network cable to your router WAN port. Connect
the other end of the network cable to your xDSL/Cable modem network
port.
© Copyright 2011 TRENDnet. All Rights Reserved.
6. Connect the included power adapter to your router Power Port and
then to an available power outlet. Push the On/Off Power Switch on your
router to the "On" (inner) position.
7. Turn on your xDSL/Cable modem.
8. Verify that the following front panel LED indicators on your router:
Power (Solid Green), Status (Blinking Green), LAN 1, 2, 3, or 4
(Solid/Blinking Green), WAN (Solid/Blinking Green), and WLAN (Blinking
Green)
Basic Router Setup
7