TRENDnet TEW-659BRV User Manual page 19

TRENDnet User's Guide
Wi-Fi Protected Access (WPA)
To select and configure WPA or WPA2 PSK (Preshared Key), select WPA-PSK, WPA2-
PSK, or WPA-PSK / WPA2-PSK, in the Authentication drop-down list.
Note: It is recommended to choose the specific security type WPA-PSK or WPA2-PSK,
instead of choosing WPA-PSK / WPA2-PSK.
• Encryption – Choose TKIP, AES, or TKIP / AES.
Note: For best the wireless performance and compatibility with wireless devices:
When selecting WPA security, it is recommended to use TKIP.
o
When selecting WPA2 security, it is recommended to use AES.
o
It is recommended to configure the specific encryption type instead of
o
choosing TKIP / AES.
• Preshared Key – Enter the passphrase.
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
© Copyright 2012 TRENDnet. All Rights Reserved.
Click Save to save the changes.
Note: If you would like to discard the changes, click Undo before you click Save.
For advanced users, to select and configure WPA or WPA2 (Wi-Fi Protected Access) EAP
(Extensible Authentication Protocol, also called RADIUS, Remote Authentication Dial-In
User Service), select WPA, WPA2, or WPA / WPA2, in the Authentication drop-down
list.
Note: It is recommended to use PSK because it is easier to setup and simply requires you
to create a passphrase compared to EAP which requires you to connect an external
RADIUS server and requires more configuration.
Note: If you select this security type, it is recommended to choose the specific security
type WPA or WPA2, instead of choosing WPA / WPA2.
TEW-659BRV
16