Advertisement
9. Select the desired Authentication mode,
select the desired Encryption type and enter
characters for your Pre-Shared key and then
click Next. For WPA-PSK or WPA2-PSK, the
Pre-Shared Key must be between 8 and 63
ASCII or 64 HEX characters. Make sure to
copy down the Pre-Shared Key.
10. Check Do you want to proceed with
network testing? and then click Apply
Settings.
11. Wait around 43 seconds while the router
reboots.
12. Wait around 15 seconds while the router tests
the Internet connection.
13. Click Finish.
8
Advertisement
