Package Contents
The package contains the following items. In case of return, please keep the original box set, and
the complete box set must be included for full refund.
•
TEW-653AP
•
12V/1A 100V~240V Power Adapter
•
Quick Installation
•
CD-Rom (User's Guide)
•
Mounting Kit
System Requirement
The following are the minimum system requirements in order to configure the device.
•
PC/AT compatible computer with an Ethernet interface.
•
Operating system that supports HTTP web-browser
Hardware Installation
Front Panel
The image below shows the front panel of the TEW-653AP
Reset Button: This button will reset the TEW-653AP to its factory default settings. To do this,
press and hold the Reset button for 10seconds.
Power LED: On - Power on
Off - No Power
LAN LED:
On - The LAN port is active
Off- No active connection on the LAN port.
Flashing – Data is being transmitted or received on the LAN port
WLAN LED: Flashing – Data is being transmitted or received through the wireless access point
Rear Panel
The image below shows the rear panel of the TEW-653AP