Encryption: Wpa Radius; Filter - TRENDnet TEW-653AP User Manual

Encryption: WPA RADIUS

ESSID Selection: As this device supports multiple SSIDs, it is possible to configure a different
security mode for each SSID (profile). Select an SSID from the drop-down list.
Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID broadcast
feature. When this option is set to Enable, your wireless network name is broadcast to anyone
within the range of your signal. If you're not using encryption then they could connect to your
network. When this is disabled, you must enter the Wireless Network Name (SSID) on the client
manually to connect to the network.
WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS) feature for prioritizing
voice and video applications. This option can be further configured in WMM under the Wireless
drop-down menu.
Encryption: Select WPA RADIUS from the drop-down list.
WPA Type: Select TKIP, AES, or WPA2 Mixed. The encryption algorithm used to secure the data
communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is
based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption. Note
that, if the bridge uses the AES option, the bridge can associate with the access point only if the
access point is also set to use only AES.
RADIUS Server IP Address: Specify the IP address of the RADIUS server.
RADIUS Server Port: Specify the port number of the RADIUS server, the default port is 1812.
RADIUS Server Password: Specify the pass-phrase that is matched on the RADIUS Server.

Filter

The filter section can be used to filter network access by machines based on the unique MAC
addresses of their network adapter. It is most useful to prevent unauthorized wireless devices from
connecting to your network. A MAC address is a unique ID assigned by the manufacture of the
network adapter.