TRENDnet TEW-637AP Quick Installation Manual page 5

5. Connect the provided network cable from a
LAN port on your Router to the LAN port on the
TEW-637AP. Then click Next.
6. Connect a RJ-45 cable from a LAN port on your
Router to the Ethernet port on your computer.
7. Connect the Power Adapter to the Access Point
and then to a power outlet. Verify that the
power switch is set to the on position (EU
version only). Then click Next.
8. Select the TEW-637AP from the list and then
click Configure.
9. Enter a password and then click Login. The
default password is admin.
3