TRENDnet TEW-432BRP User Manual page 20

Step 2: Set LAN connection and DHCP server
Set user's IP address and mask. The default IP is 192.168.10.1. If the user chooses
to enable DHCP, please click "Enable". DHCP enabled is able to automatically
assign IP addresses. Please assign the range of IP addresses in the fields of "Range
start" and "Range end". Please click "Next" to continue.
Step 3: Set Internet connection
The WLAN Router will attempt to auto detect your Internet Connection.
If the WLAN Router is unable to auto detect your Internet connection, you will
need to manually select the Internet connection type: PPPoE to obtain IP
automatically; PPPoE with a fixed IP address; PPTP.