Denon AVR-790 Owner's Manual page 27

Check Audyssey Auto Setup
Measurement Results (Parameter Check)
This is displayed after the Audyssey Auto Setup procedure is
completed.
1
3-2.Parameter Check
Press ui to select
"Parameter Check", Speaker Config.Check
Distance Chenck
then press .
Channel Level Check
Crossover Freq.Check
"Parameter Check" is
EQ Check
displayed on the on-screen
Restore
display.
[ENT]:Select [RTN]:Back
2
ui
Use to select the item you want to check, then
press .
Speaker Config. Check
: Check the speaker configuration
Distance Check
: C heck the distance
Channel Level Check
: C heck the channel level
Crossover Freq. Check
: Check the crossover frequency
EQ Check
: C heck the equalizer
3
Use o p to switch the display between the different
speakers.
4
Press .
The confirmation screen reappears. Repeat steps 2 and 3.
Even if the settings are changed after the Audyssey Auto Setup
procedure, the Audyssey Auto Setup settings can be restored by
selecting "Restore" then pressing .
Front
Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup)
ENGLISH