Denon AVR-790 Owner's Manual page 18

ENGLISH
Recording Components
Digital Video Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting Devices
Equipped with HDMI terminals" on page 12.
DVD Recorder
Set as necessary
Set this to change the input signal to which the input source is
assigned.
"Assign" (vpage 33)
NOTE
• To record video signals through the AVR-790, use the same type of video
cable for connection between the AVR-790 and the player as the cable used
for connection between the AVR-790 and the recorder.
• Do not connect the output of the component connected to the AVR-790's
OPTICAL2 output connector to any input connector other than OPTICAL2.

Video Cassette Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting
Devices Equipped with HDMI terminals" on page 12.
L R L R
L R L R
Set this to change the input signal to which the input source
is assigned.
"Assign" (vpage 33)
NOTE
To record video signals through the AVR-790, use the same type
of video cable for connection between the AVR-790 and the player
as the cable used for connection between the AVR-790 and the
recorder.
Video cassette recorder
L R L R
L R L R
Set as necessary
Connecting Devices not Equipped with HDMI terminals
SAT/CABLE Tuner
Select the terminal to use and connect the device.
For instructions on HDMI connections, see "Connecting
Devices Equipped with HDMI terminals" on page 12.
SAT/CABLE Tuner
L R
L R
Set as necessary
Set this to change the input signal to which the input source
is assigned.
"Assign" (vpage 33)