Boot Sequence - Dell Vostro 200 Owner's Manual

Onboard LAN Boot
ROM
SATA Mode
Power Management Setup
ACPI Suspend Type
Quick Resume
Remote Wake Up
USB KB Wake-Up
From S3
Auto Power On
Auto Power On Date 0
Auto Power On Time 0:00:00
AC Recovery

Boot Sequence

This feature allows you to change the boot sequence for devices.
Option Settings
• Diskette Drive — The computer attempts to boot from the floppy drive. If
the floppy disk in the drive is not bootable, if no floppy disk is in the drive,
or if there is no floppy drive installed in the computer, the computer
generates an error message.
• Hard Drive — The computer attempts to boot from the primary hard
drive. If no operating system is on the drive, the computer generates an
error message.
• CD Drive — The computer attempts to boot from the CD drive. If no CD
is in the drive, or if the CD has no operating system, the computer
generates an error message.
178
Appendix
Enabled or Disabled (Disabled by default)
IDE; RAID; AHCI (IDE by default)
S1(POS); S3(STR) (S3(STR) by default)
Disabled; Enabled (Disabled by default)
On; Off (On by default)
Enabled; Disabled (Disabled by default)
Enabled; Disabled (Disabled by default)
Off; On; Former-Sts (Off by default)