Section - Configuration
Transmit Power:
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
RTS Threshold:
This value should remain at its default setting of
2432. If inconsistent data flow is a problem, only a
minor modification should be made.
Fragmentation
The fragmentation threshold, which is specified
Threshold:
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346
is the default setting.
DTIM Interval:
(Delivery Traffic Indication Message) 3 is the default
setting. A DTIM is a countdown informing clients
of the next window for listening to broadcast and
multicast messages.
WMM Function:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless
clients.
Short GI:
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may
create higher data loss.
D-Link DIR-68 User Manual
Advanced Wireless Settings
1