Wireless--Mac Filter - D-Link DSL-2640B User Manual

Section 6 - Advanced Setup

Wireless--MAC Filter

The MAC Filter feature allows you to disable, allow or deny users access to the wireless router based on their MAC
address. To add MAC addresses, click on Add to continue. Click on Remove if you want to take out a MAC address
from the MAC filter list.
The MAC filter screen allows you to manage MAC address
filters. Add the MAC addresses that you want to manage
and then select the mode that you want to use to manage
them. Using the MAC Restrict Mode, you can disable MAC
filtering, allow access based on MAC address, or deny
access based on MAC address.
When you click Add from the MAC filter screen, a MAC
address add screen will appear. Enter a MAC address of a
computer on your network and click Apply.
To determine the MAC address of a computer see "Networking
Basics" in the Appendix section of this manual.
D-Link DSL-640B ADSL+ 4-Port Router User Manual 60