Table of Contents
Advertisement
Using the Configuration Menu (continued)
Advanced > Performance > 802.11g (continued)
CTS Mode-
802.11g only mode-
Administrator
Login Name-
user (lower case) is the default login name
for the user account. The user account has
read-only access to the router.
User
Login Name-
admin (lower case) is the default login
name for the admin account. The admin
account has read/write access to the
router.
Admin Password-
User Password-
CTS (Clear To Send) is a function used to minimize collisions
among wireless devices on a wireless local area network (LAN).
CTS will make sure the wireless network is clear before a wire-
less client attempts to send wireless data. Enabling CTS will
add overhead and may lower wireless throughput.
None-
CTS is typically used in a pure 802.11g environment.
If CTS is set to "None" in a mixed mode environment
populated by 802.11b clients, wireless collisions may
occur frequently.
Always-
CTS will always be used to make sure the wireless
LAN is clear before sending data.
Auto-
CTS will monitor the wireless network and automati-
cally decide whether to implement CTS based on
the amount of traffic and collisions that occurs on
the wireless network.
Select this mode to restrict your network to only those devices
that employ the 802.11g standard. Enabling this mode will en-
sure that you maintain the highest connectivity rate, unhampered
by any connection to an 802.11b device.
The default setting is blank - no password. To change the pass-
word, enter and confirm the new password.
The default setting is blank - no password. To change the pass-
word, enter and confirm the new password.
Tools> Admin
34
Advertisement
Table of Contents
