Table of Contents
Advertisement
Using the Configuration Menu (continued)
Super A Mode-
Disabled-
Super A without
Turbo-
Super A with
Dynamic Turbo-
Super A with
Static Turbo-
Wireless
Performance-
Select 802.11a or 802.11g.
802.11g is selected here. Dis-
played in this window are the
Wireless Performance fea-
tures for the Access Point por-
tion of the DI-784.
TX Rates-
Auto is the default selec-
tion. Select from the drop
down menu for your selec-
tion.
Transmit Power-
Beacon interval-
Advanced > Performance > 802.11a (Continued)
Super A is a group of performance enhancement features that
increase end user application throughput in an 802.11a network.
Super A is backwarsd compatible to standard 802.11a devices.
For top performance, all wirelss devices on the network should
be super A capable. Select either Disabled, Super A without Turbo,
Super A with Dynamic Turbo, or Super A with Static Turbo.
Standard 802.11a support, no enhanced capabilities.
Capable of Packet Bursting, FastFrames, Compression, and no
Turbo mode.
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with non-
Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all nodes on the wireless network is Super A with Dynamic
Turbo enabled.
Capable of Packet Bursting, FastFrames, Compression, and
Static Turbo. This setting is not backwards compatible with non-
Turbo (legacy) devices. Static turbo mode is always on and is
only enabled when all nodes on the wireless network is Super A
with Static Turbo enabled.
Advanced > Performance > 802.11g
Full is the default selection. Select from the drop down menu for
your selection.
Beacons are packets sent by the DI-784 to synchronize a wire-
less network. Specify a value. 100 is the default setting and is
recommended.
32
Advertisement
Table of Contents
