D-Link AirPlus DI-714P+ Manual page 27

Using the Configuration Menu
Advanced > Routing
Static routes can be added if you require specific routes within your internal network.
These routes will not apply to the WAN (Internet) network.
Destination-
Subnet Mask-
Gateway-
Hop-
Enable-
Hop Count - in a transmission path, each link is terminated at a network device
such as a router or gateway. The number of hops equals the number of routers or
gateways that data must pass through before reaching the destination.
Enter in the IP of the specified network that you want to
access using the static route
Enter in the subnet mask to be used for the specified net
work.
Enter in the gateway IP address to the specified network.
Enter in the amount of hops it will take to the specified
network.
Select this option for the specified static route to take effect.
27