NOTE: If you select multiple APs to manage, the Web interface displays the selected
APs in the MAC Address field one by one after you submit a configured AP
entry.
To view the list of failed APs by using the CLI, use the
command in Privileged EXEC mode. To view the list of APs detected through the RF scan,
use the
show wireless ap rfscan status
To add a failed or rogue AP to the local Valid AP database, use the procedures described in
"Using the Local Database for AP Validation"
4 Installing the D-Link Unified Access System
show wireless ap failure status
command.
on page 76.
Authenticating and Validating Access Points
81