Changing The Captive Portal Settings; Figure 78. Captive Portal Configuration; Table 58. Cp Configuration - D-Link DWS-3024 User Manual

D-Link Unified Access System User Manual
Table 57. Captive Portal Summary
Field
Protocol
Verification

Changing the Captive Portal Settings

By default, the D-Link Unified Switch has one captive portal. You can change the settings for
that captive portal, and you can also create and configure up to nine additional portals. After
you create a captive portal from the CP Summary page, you can change its settings.

Figure 78. Captive Portal Configuration

Table 58

Table 58. CP Configuration

Field
Enable Captive
Portal
Configuration
Name
170 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Description
Indicates whether the portal uses HTTP or HTTPS.
Specifies which type of user verification to perform:
• Guest: The user does not need to be authenticated by a database.
• Local: The switch uses a local database to authenticate users.
• RADIUS: The switch uses a database on a remote RADIUS server to
authenticate users.
To configure authorized users on the local or remote RADIUS database, see
"Monitoring and Configuring Captive Portal Users"
describes the fields on the CP Configuration page.
Description
Select the check box to enable the CP. Clear the check box to disable it.
This field allows you to change the name of the portal added from the CP
Summary page.
on page 174.