xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Connecting DC Power to DES-3526DC
Follow the instructions below to connect the DC power supply of the DES-3526DC to the DC power source.
1. Firmly attach the DC power to the negative and positive contacts on the wiring assembly.
The negative pole (-) connects to the -48V contact.
•
The positive pole (+) connects to the -48V Return contact.
•
If available, the earth ground may be connected to center contact post.
•
2. Tighten the contact screws so the connection is secure.
Figure 2- 4. Power connections attached to contacts on assembly
9