Camera Control - D-Link DCS-5610 User Manual

Section  - Configuration
Here you can preset the locations and change the default location for your home button.
Up, Down, Left, "Home" aims the camera to the center,
Right, Home: where as the other buttons aim the camera
accordingly.
Zoom (-):
Zoom widely function.
Zoom (+):
Zoom telescopically function
Pan Speed:
Select the speed at which the camera will
pan for a full cycle from the pull down menu.
Select a value between -5 and +5, -5 being
the slowest setting.
Tilt Speed:
Select the speed at which the camera will
tilt for a full cycle from the pull down menu.
Select a value between -5 and +5, -5 being
the slowest setting.
Zoom Speed:
Select the speed at which the camera will
zoom for a full cycle from the pull down menu.
Select a value between -5 and +5, -5 being
the slowest setting.
Auto pan/patrol
Select the speed at which the camera will pan
speed:
during auto patrol. Select a value between 1
and 5, 1 being the slowest setting.
Dwelling time (sec):
Set the value of time that the camera will remain on each preset position before moving to the next. The dwelling time
can be set between 1 and 255 seconds.
Preset locations:
Desired positions that have been configured.
Selected locations:
To use the Auto Patrol feature, select the desired preset positions from the Preset Locations list and add them to the
Selected Locations list by clicking Select. You can then select the order in which the camera will patrol through the preset
locations by selecting a location and clicking UP or DN. Click Remove to remove a location from the list.
D-Link DCS-5610 User Manual

Camera Control