Device Information - D-Link EBR-2310 User Manual

Section 3 - Configuration
This page displays the current information for the WBR-2310. It will display the LAN, WAN, and Wireless information.
If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
LAN:
Displays the MAC address and the private
(local) IP settings for the router.
WAN:
Displays the MAC address and the public IP
settings for the router.
D-Link EBR-2310 User Manual

Device Information

34