Table of Contents
Advertisement
Change spanning tree protocol version.
Parameters:
stp specifies the original spanning tree protocol (STP,802.1d).
rstp specifies rapid spanning tree protocol (RSTP,802.1w).
[no] spanning‐tree port mcheck [<port‐list>]
Force the port to transmit RST BPDUs. No format means not force the port to transmit RST BPDUs.
Parameters:
[<port‐list>] specifies the ports to be set. Null means all ports.
[no] spanning‐tree port edge‐port [<port‐list>]
Set the port to be edge connection. No format means set the port to be non‐edge connection.
Parameters:
[<port‐list>] specifies the ports to be set. Null means all ports.
[no] spanning‐tree port non‐stp [<port‐list>]
Disable or enable spanning tree protocol on this port.
Parameters:
[<port‐list>] specifies the ports to be set. Null means all ports.
spanning‐tree port point‐to‐point‐mac <auto | true | false> [<port‐list>]
Set the port to be point to point connection.
Parameters:
auto specifies point to point link auto connection.
true specifies point to point link true.
false specifies point to point link false.
[<port‐list>] specifies the ports to be set. Null means all ports.
Advertisement
Table of Contents
