Table of Contents
Advertisement
At "Are you sure?" hit "space bar" once to show "Yes" and
then hit "Enter".
On Hyper Terminal's Menu Bar, click on "Transfer" and
select "Receive File...".
Input the path where you would like to save the file to (or
click on "Browse" to select the location), click on the drop
down arrow and select "Xmodem" as transfer protocol, click
on "Receive", enter the desired file name, and then click
"OK".
After saving the file, the cursor will move to "Exit", hit
"Enter" to go back to "File" menu.
Download Configuration: Select this for loading the previously
saved configuration back to the Switch
Move cursor to "Download Configuration" and hit "Enter".
At "Are you sure?", hit "space bar" once to show "Yes" and
then hit "Enter".
On Hyper Terminal's Menu Bar, click on "Transfer" and
select "Send File...".
Input the path and file name of the configuration file (or
click on "Browse" to select file from the location), click on
the drop down arrow and select "Xmodem" as transfer
protocol, and click on "Send".
32
Advertisement
Table of Contents
