TRENDnet TEG-S224TXA User Manual page 33

26-port 10/100/1000mbps smart copper gigabit switch with 2×1000base-t + 24×10/100base-tx ports

Hide thumbs Also See for TEG-S224TXA:

Table of Contents

port and then hit [Space Bar] to select "V" to add the port to the

VLAN group or select "-" to delete the port from the group. By

default, all ports belong to VLAN 1. The default setting of VLAN

is shown as Figure 10.

Figure 10. VLAN Configuration

For example, there are five computers (PC1~PC5) connected to

the Switch's port 1~5. They had been divided into two VLAN

groups: VLAN1 (PC1~PC4) and VLAN2 (PC2~PC5). There is

no way to connect PC1 and PC5 shown as Figure 11. If PC1 has

to connect to PC5, it should joint PC1 and PC5 in the same

VLAN.

Table of Contents