Setting The Theft Alarm - Motorola V3620 Manual

Table of Contents

Advertisement

Setting the Theft Alarm

The Theft Alarm locks your phone to prevent unauthorized
access. To unlock it, you must enter your three-digit lock
code. (See "Unlocking the Phone" on page 84 and "Viewing
Your Lock Code" on page 87 for additional information
about your phone's lock code.) If an unauthorized person
turns the phone on and does not enter the lock code within
30 seconds, your phone places two calls to a single
pre-programmed telephone number that you specify. The
person who answers the call will hear a high-pitched alarm
tone indicating that your phone is in distress. You must
unlock your phone to resume normal operation.
1. Follow the road map in the margin.
1. Press
to toggle the feature on or off. When you
turn the alarm on, the display prompts you for a
telephone number.
2. Press
to see the previously stored number (if you
entered one earlier), or ...
Enter the number you want the phone to call in the
event of unauthorized access.
3. Press
to set the alarm.
When the Theft Alarm is on, you will see
display. The Theft Alarm is reset before each use.
Note: If your phone is lost or stolen, contact your cellular
service provider to turn off service to the phone.
in the
Armed
F
then
Phone
Book
Press
3 times
Lock
Secure
Theft
AlrmOff
83

Advertisement

Table of Contents
loading

Table of Contents