Table of Contents
Advertisement
antenna and avoid obstructions like tunnels, parking
garages and tall buildings whenever possible.
Q. I am in my home service area but the Roam indicator is
flashing.
A. If your phone is programmed with more than one
telephone number, you might not have switched to the
number appropriate for your current location. Press
R, #, s to switch to your other number. (See
"Using Two Cellular Phone Numbers" on page 95 for
more information on multiple phone numbers.)
Q. I tried to read my Voice Mail (or use a paging service or a
calling card) but nothing happened.
A. You have probably turned off the Scratchpad tones. Place
your call, enter the access numbers when prompted by
the recording, then press R, S. To avoid this
problem in the future, see "Setting Scratchpad Tones"
on page 80 for instructions on how to turn the
Scratchpad tones on.
Q. I tried to place a calling card call using the internal
Phone Book, but it did not work.
A. You may have turned off your Scratchpad tones. See
"Setting Scratchpad Tones" on page 80 for instructions
on how to turn the Scratchpad tones on.
Check that you stored your calling card information in
the correct order, and make sure the groups of numbers
are separated by pauses. The easiest way to correct the
sequence may be to start over, enter your calling card
135
Advertisement
Table of Contents
