Using Layer And Split Together - Casio CTK-900 User Manual

• Turning on split switches the currently selected part to Part
3, and displays the split tone. At that time, you can use the
[ ] and [ ] CURSOR buttons to switch between parts.
Turning off split returns to Part 1.
• The main tone sounds over Channel 1, while the split tone
sounds over Channel 3. You can also use the Mixer to
change the tone and volume settings for these channels.
• Note that split is not possible during record standby or
recording in the Song Memory Mode, or while you are using
the SMF Player Mode.
• When the accompaniment mode is set to CASIO CHORD or
FINGERED, the accompaniment keyboard range is in
accordance with the split point you specify with the above
procedure.

Using Layer and Split Together

You can use layer and split together to create a layered split
keyboard. It makes no difference whether you layer tones first
and then split the keyboard, or split the keyboard and then
layer tones. When you use layer and split in combination, the
high range of the keyboard is assigned two tones (main tone
+ layered tone), and the low range two tones (split tone +
layered split tone).
LAYER SPLIT
To split the keyboard and then layer tones
1.
Press the TONE button and then input the tone
number of the main tone.
Example:
To set "461 GM BRASS" as the main tone.
B
707A-E-065A
a r s s G
Keyboard Settings
2.
Press the SPLIT button and then input the number
of the split tone.
Example:
To set "445 GM PIZZICATO" as the split tone.
P
• After specifying the split tone, press the SPLIT button
to unsplit the keyboard.
3.
Press the LAYER button and then input the
number of the layered tone.
Example:
To set "460 GM FRENCH HORN" as the layered
tone.
F
4.
Press the SPLIT button or the LAYER button so
both of the SPLIT and LAYER indicators are
displayed.
5.
Input the number of the layered split tone.
Example:
To specify the "448 GM STRINGS 1" tone, enter
4, 4, 8.
S
6.
While holding down the SPLIT button, press the
keyboard key where you want the lowest note (the
leftmost key) of the upper range (right side range)
to be.
7.
Play something on the keyboard.
• Press the LAYER button to unlayer the keyboard, and
the SPLIT button to unsplit it.
• Turning on layer+split switches the currently selected part to
Part 4, and displays the layered tone. At that time, you can
use the [ ] and [ ] CURSOR buttons to switch between
parts. Turning off layer returns to Part 3, while turning off split
returns to Part 2. Turning off both layer and split returns to
Part 1.
• The main tone sounds over Channel 1, the layer tone over
Channel 2, the split tone over Channel 3, and the layer/split
tone over Channel 4. You can also use the Mixer to change
the tone and volume settings for these channels.
z i z a t G c
H r o n G r
r t i n 1G
g
E-63