Table of Contents
Advertisement
Parameter Details
The following provides details about the parameters you can
configure using the drawbar organ tone editing screen.
Drawbar Position
This parameter defines the position of each drawbar, and the
volume of each overtone. The larger the value, the greater the
corresponding overtone's volume.
Parameter Name
Drawbar 16'
Ft16'
Drawbar 5 1/3'
Ft 5 1/3'
Drawbar 8'
Ft 8'
Drawbar 4'
Ft 4'
Drawbar 2 2/3'
Ft 2 2/3'
Drawbar 2'
Ft 2'
Drawbar 1 3/5'
Ft 1 3/5'
Drawbar 1 1/3'
Ft 1 1/3'
Drawbar 1'
Ft 1'
(Ft: Feet)
Click
The parameter determines whether or not a key click is added
when a sustained tone configured using the drawbars is
played.
Parameter Display
Parameter Name
Click
Click
Percussion
This parameter lets you add percussion sound, which
provides modulation to sustained tones that you create.
When you hold down a key on the keyboard, the sound
produced decays until it is no longer audible. Pressing the key
again sounds the note again at a louder volume. Percussion
has "2nd Percussion" (2nd overtone pitch) and "3rd
Percussion" (3rd overtone pitch) settings, each of which can
be turned on or off.
You can also specify the percussion decay time, which
controls how long it takes for the percussion sound to decay.
707A-E-023A
Parameter Display
Settings
Indication
Settings
Indication
oFF:
Click Off
on:
Click On
Using the Drawbar Organ Mode
Parameter Name
2nd Percussion
3rd Percussion
Percussion Decay Time
Display Contents in the Drawbar Organ Mode
In the Drawbar Organ Mode, the current status of the
drawbar positions, key click, and percussion parameters are
indicated on the display's bar graph as shown in the
illustrations below. There is one line for each parameter, and
the bottom segment of the selected parameter line flashes.
0 to 3
The bottom segment of the bar graph column that represents
the currently selected parameter flashes to indicate that it is
0 to 3
selected.
0 to 3
None of the channel numbers (1 to 16) are displayed in the
0 to 3
drawbar organ tone selection mode and editing mode.
0 to 3
Drawbar Position Graph
0 to 3
Setting Value
0 to 3
0 to 3
0 to 3
Click and Percussion On/Off Graph
Percussion Decay Time Graph
Setting Value
Parameter Display
Indication
Second
Third
Decay
0
1
Display
Setting Value
Off
Display
0-31
32-63
Display
Settings
oFF:
Off
on:
On
oFF:
Off
on:
On
000 to 127
2
3
Off
On
Flash
On
64-95 96-127
E-21
Advertisement
Table of Contents
